Configuration

The Xenon allows any mix of formats within a frame in independent blocks of 32 inputs or outputs. Any of the supported formats, 3G/HD/SD/AES/Analog can be expanded to fill an entire 128 x 128 frame. Additionally the Xenon supports optical routing from 3Mb/s to 3Gb/s in blocks of 32 inputs or outputs.

The Xenon is housed in a 4RU frame, switching up to 64 sources to 64 destinations, or in an 8RU frame switching up to 128 sources to 128 destinations. Additional input and output modules can be installed into the router at anytime.

Control

The Xenon router includes, as standard, an internal Frame Controller module which supports four Q-Link ports, two Ethernet ports and two Serial ports mounted on the rear of the router.

The Xenon has a number of control options, they are: Remote Control Panel: Any panel(s) from the entire range of Quartz remote control panels can be used with the Xenon router connected via Q-Link. External third party control: The Xenon router can be remotely controlled via an external third party control device, such as an automation system, when connected to the router’s serial port.

Expansion

The input and output stages of the Xenon can be expanded in steps of 32 at any time by adding additional I/O modules. The Xenon can not be expanded beyond its frame size

Power Supply

The power supplies for the Xenon are internal. The 4RU & 8RU frame can be fitted with an optional redundant power supply with separate AC power inlet & alarm output.

Designed for Performance Ultra Wide Band Routing

By offering a format independent data path, the Xenon supports signals from 3Mb/s all the way up to 3Gb/s including SD-SDI, HD-SDI, 3G-SDI, DVB-ASI, SMPTE ST 310-1 digital video formats as well as optical formats and other high data rate signals.

Video

Xenon supports 3G, HD, SD and ASI video routing. It is available as 3G/HD/SD or HD/SD or SD only, offering cost savings for those who do not require 3G and or HD capability. For those applications requiring the signal to be reclocked, reclocking modules can be added in blocks of eight outputs.

Audio

The Xenon router is a fully featured Stereo Audio router. Xenon supports AES and Analog Audio routing. Balanced AES or unbalanced AES on BNCs are supported in any mixture in blocks of 32 inputs or outputs. The Xenon also supports analog routing. Analog audio I/O is converted and routed as digital so that analog sources can route to AES destinations and AES sources can route to analog destinations. Analog blocks are in groups of 32 stereo pairs. The Xenon can optionally support Mono routing for AES and Analog audio by adding the +SS option. Additionally, the xenon also supports MADI I/O as an option on all audio i/o cards. On input cards this ADDS a MADI connector for MADI input. Note that these inputs are IN ADDITION TO the analog or AES base I/O. On output cards a MADI output connector is ADDED. This too offers MADI outputs IN ADDITION to the base I/O card

Signal and System Monitoring

Xenon supports SNMP signal monitoring and comprehensive system monitoring, including power supply voltages, interior temperatures and fan speeds. System status may also be monitored remotely by a network based remote connection over TCP/ IP or a direct serial connection to a PC. User-confi gurable closing contacts are also provided for connection to an external alarm system.

X-LINK

X-LINK outputs are an additional set of outputs from Evertz standard router platforms. They are for the purpose of providing connectivity to monitoring devices. X-LINK outputs do not reduce the number of outputs on the router, X-LINK outputs are in addition to the standard video router outputs.